A guided sequence through inspection, electrical and mechanical testing, and the repair-vs-replace decision — your entries are saved in this browser only.
Discoloration or staining on windings and internal surfaces
Mineral deposits or silt residue in the terminal box
Corrosion at dissimilar-metal contact points
Unusual odor suggesting standing water or biological growth
Guidance only — presence of any indicator does not by itself determine the recovery level.
FUTURE AI Suggest next inspection step — not yet available
Evidence Photos
Photos stay only for this browser session — they are not saved if you reload or close this page. Generate your Engineering Summary (Step 9) before closing if you need a record of what was uploaded.
📷 Click to add inspection photos (stays in your browser only)
Electrical Measurements
Interactive version of the Megger Test Record — per IEEE 43. Enter readings only; SRT does not calculate or interpret them automatically — trend evaluation is an engineering judgement (see Step 7).
Before Taking Insulation Measurements
Verify motor temperature is recorded alongside the reading
Disconnect auxiliary circuits that could affect the reading
Record ambient temperature
Confirm test voltage matches the machine's rated voltage class
This is where your own engineering judgement combines the readings above — SRT's tools organize the data, they don't conclude for you.
FUTURE AI Interpret engineering observations — not yet available
Assessment Timeline
Overall Risk Level (your assessment)
LOW
MEDIUM
HIGH
Repair vs Replace Decision
Interactive version of the Repair vs Replace Decision Matrix. This tallies your selections — it does not weight or score them for you.
Test/inspection trend
Mechanical condition
Replacement lead time
Relative cost
Remaining service life needed
0
Repair (trend)
0
Repair (mech)
0
Repair (lead time)
0
Repair (cost)
0
Repair (life)
This tally is a visual aid only — the final recommendation is an engineering judgement, not an automatic output of this count.
Recommendation & Summary
FUTURE AI Summarize findings automatically — not yet available; use Generate Engineering Summary above
Click "Generate Engineering Summary" to compile everything entered above into a single view — useful to review before printing (Ctrl+P) or requesting SRT's own assessment.
