← Back to Emergency Guides
This guide provides engineering priorities and awareness points only — it does not include detailed repair procedures or safety-critical instructions requiring on-site engineering judgement. For a specific situation, work through the resources below or request a technical assessment.
Immediate Engineering Priorities
1
Confirm the affected area has been declared safe for re-entry before approaching equipment.
2
Keep power isolated to the affected zone until insulation has been checked by a qualified person.
3
Ventilate the area if it is safe to do so, without disturbing soot or debris that hasn't been documented yet.
4
Keep fire- and smoke-affected equipment segregated from unaffected equipment.
5
Engage a qualified engineer before assuming any specific piece of equipment is undamaged.
Common Mistakes to Avoid
✗Treating soot-only exposure as harmless because there's no visible burning.
✗Assuming equipment physically distant from the fire's origin is unaffected.
✗Discarding damaged components before an engineering opinion has been obtained.
✗Delaying insulation testing because equipment "looks fine."
Evidence Preservation
✓Photograph the extent of fire and smoke spread throughout the affected area.
✓Note which specific pieces of equipment were within the affected zone versus merely nearby.
✓Preserve any component suspected of being the fire's origin for root-cause investigation.
Related Engineering Resources
Next Step
